
Montarbo Nettuno 20 Active PA System
£3679.95
The power of ground stacked point sources...
This system consists of a 2-way passive top and an active subwoofer. The simple interconnection of the two modules by means of a single SPEAKON® cable results in a ready set-up system, featuring high performance and an extended frequency response (from 38 Hz to 20 KHz). The maximum sound pressure (137 dB SPL) and power (1600 W RMS – 3200 W Peak) available are extremely high, providing no-compromise results when large-area coverage is required. The system is equipped with two semi horn loaded 15” woofers, featuring a 3” voice coil, four 8’’ woofers with 2’’ voice coil and a compression driver with a 1.4” throat and 3” voice coil.
The 90°x40° coverage (HxV) ensures a well-distributed sound, and the horn's adjustable angle (up to 90°) enhances horizontal coverage when using two tops side by side.
Nettuno 20 performs at extraordinarily high levels when especially outstanding dynamics are required. Thanks to the RD NET connectivity and the Aurora NET Software (MAC and PC) the system may be readily adapted to different applications. When it is not possible to place the speaker systems on the stage floor, the Nettuno 20 may be placed at ground level and the TOP cabinet may installed on top of the bass cabinet by means of poles or even flown. The typical application for this system is the coverage of large areas when suspended line-array systems are not suitable budget wise or by technical means.
Bluetooth® connectivity, to stream audio wirelessly, completes this all in one wonder.
Price is for one system comprising of one subwoofer and one MHF enclosures.
LF: 2x 15" I 3" VC Drivers
MHF: 4x 8" I 2" VC Drivers
90° H x 40° V
(-10dB) 74Hz - 20KHz (top)
(-10dB) 38.5Hz - X-Over (subwoofer)
1600W RMS
Max SPL: 137dB
DSP | 32 Bit |
AD/DA Converter | 24 bit, 48 kHz |
Limiter | Dual Active Peak, RMS, Thermal |
Controls | Rotary encoder (subwoofer level) |
Presets | Flat – user/service |
Connectors | XLR (input) XLR Link OUT, speakON® (Output to top) |
RDNet | Data In / Data Out (etherCON® connectors) |
Suspension points | 2x M10 [TOP] |
Pole Mounting | 36 mm [TOP] |
Handles | Built in (1 per side) [TOP] |
Dimensions | 260x1150x360 mm [TOP] |
Weight | 28.5 Kg [TOP] |
Cabinet | Plywood with black coating |